Run "supportingfiles_v0.7.bat" by double clicking the file. Ensure the folder "ECUFiles" is contained in the same folder as the "supportingfiles_v0.7.bat" file. 

Run the Toolkit installer file, "9927-1226_FA.exe" to install the software. After successful installation two additional steps need to be completed: 
    1. Point Toolkit to the subfolders contained in the above "ECUFiles > Toolkit" folder (reference below Knowledge Base article for setup details)
    2. Configure the Kvaser cord connection (reference below Knowledge Base article for setup details)

Link to Knowledge base article for setting up Toolkit: https://kb.reliablehp.com/knowledge/toolkit-setup-installation-guide
    No downloads are required as mentioned in the article; these are contained in the included "ECUFiles" folder

